What is a Stick style isothermal quenching furnace? Introduction to the advantages and characteristics of Forging furnace functions

Stick style isothermal quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used in chemical industry, petroleum, electron, pharmacy, shipping and other fields，it is usually composed of convection chamber, furnace chamber, Radiation chamber, ventilation system and Radiation chamber，This productThe structural design is simple, novel and special.，is a Stick style isothermal quenching furnace newly developed by One-combustion energy saving。

1、Brief introduction of Stick style isothermal quenching furnace

Stick style isothermal quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as temper, heat treatment, hardening and tempering, Casting heating and quench，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，features include Stable and reliable, Stable and reliable, energy-efficient, Easy to control and Strong adaptability，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Stick style isothermal quenching furnace

2、Physical picture of Stick style isothermal quenching furnace

The following picture is a panoramic shot of One-combustion energy saving Stick style isothermal quenching furnace,the product looks beautiful., which is trustworthy.。

Stick style isothermal quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Stick style isothermal quenching furnace use

The purpose of Stick style isothermal quenching furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Stick style isothermal quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick style isothermal quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Stick style isothermal quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Stick style isothermal quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Stick style isothermal quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Stick style isothermal quenching furnace

4、Functional advantages of Stick style isothermal quenching furnace

The advantages of Stick style isothermal quenching furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stick style isothermal quenching furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Improve product quality

Because the Stick style isothermal quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Stick style isothermal quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Wide application range

The Stick style isothermal quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Stick style isothermal quenching furnace

5、Stick style isothermal quenching furnace function

Stick style isothermal quenching furnaceit has the functions of anneal, hardening and tempering, anneal, Casting heating and quench，be loved by our customers.。

Stick style isothermal quenching furnace

6、One-combustion energy saving's strength

The company has many years of Stick style isothermal quenching furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Stick style isothermal quenching furnaceIt has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，multifunctional, with functions such as temper, heat treatment, normalizing, Forging heating and hardening and tempering。