What is a Catalyst reduction denitrification equipment? Introduction to the principle of SCR flue gas denitrification structure

Catalyst reduction denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，it is widely used inGas power plant,metallurgy,building materials,coal-fired power station,cement plant and other industries，it is an ideal choice for customers to buy Catalyst reduction denitrification equipment。The following is to introduce the Catalyst reduction denitrification equipment:

1、Brief introduction of Catalyst reduction denitrification equipment

Catalyst reduction denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst reduction denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalyst reduction denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalyst reduction denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalyst reduction denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalyst reduction denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalyst reduction denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.，the product looks beautiful.，in the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，was developed and designed by One-combustion energy saving。

Catalyst reduction denitrification equipment

2、Catalyst reduction denitrification equipment HD picture

One-combustion energy saving Catalyst reduction denitrification equipment, product manufacturer, product features, is the ideal choice for new and old customers.。

Catalyst reduction denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Working principle of Catalyst reduction denitrification equipment

Catalyst reduction denitrification equipmentat the start of the operation,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。

Catalyst reduction denitrification equipment

4、Catalyst reduction denitrification equipment working site

You can buy Catalyst reduction denitrification equipment according to your needs and show you product videos.。

Catalyst reduction denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It has a wide range of uses, including environmental protection, Meet the requirements of environmental protection, Promote sustainable development, Improve product quality and Improve product quality。

5、How much is the Catalyst reduction denitrification equipment?

The Catalyst reduction denitrification equipment price is introduced as follows:

1. quality

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Catalyst reduction denitrification equipment will vary greatly. One-combustion energy saving attaches great importance to the quality of products, and the formulation of prices is also reasonable.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. Low cost of raw materials

Product manufacturers are different, and the cost spent by each manufacturer in producing products is definitely different. The higher the cost of producing products, the higher the price of products set by manufacturers. On the contrary, the Catalyst reduction denitrification equipment price is low.

4. regional difference

One-combustion energy savingJinan, Shandong province, the transportation is convenient, and the corresponding cost of transporting Catalyst reduction denitrification equipment is low, which reduces the cost of selling Catalyst reduction denitrification equipment by manufacturers, and the price will also decrease.

5. company strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

Catalyst reduction denitrification equipment

6、One-combustion energy saving introduced

One-combustion energy saving is a strong and professional Catalyst reduction denitrification equipment manufacturer, with advanced Catalyst reduction denitrification equipment production technology and rich production experience. It will not only provide users with Catalyst reduction denitrification equipment with Strong adaptability, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Catalyst reduction denitrification equipmentit mainly includes control system, Catalyst supply system, Temperature control and monitoring system, Catalyst reactor and Flue gas mixing and distribution system，is a popular Catalyst reduction denitrification equipment，delective catalytic reduction technology is an efficient flue gas denitrification technology.。