Introduction to Stick style annealing furnace, introduction to heating furnace advantages and characteristics

Stick style annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

1、Brief introduction of Stick style annealing furnace

Stick style annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a kind of Stick style annealing furnace manufactured by One-combustion energy saving。

Stick style annealing furnace

2、Stick style annealing furnace video detail

Speak directly with facts on the spot。

Stick style annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

3、Stick style annealing furnace performance advantage

Stick style annealing furnaces have the following advantages.

1. Rapid temperature rise

The Stick style annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Intelligent control

The Stick style annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Wide application range

The Stick style annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. easy to operate

The operation interface of the Stick style annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stick style annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

Stick style annealing furnace

4、On-site real shot of Stick style annealing furnace

Stick style annealing furnace styles and designs are diverse, specifications and models can be customized according to customer needs, providing high-definition pictures for new and old customers' reference.。

Stick style annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Stick style annealing furnace characteristics

Stick style annealing furnace has the following characteristics

1. Strong adaptability

The Stick style annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to maintain

The structural design of the Stick style annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Stick style annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Stick style annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Stick style annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Stick style annealing furnace

6、Stick style annealing furnace price consultation

The Stick style annealing furnace price is introduced as follows:

1. quality

The Stick style annealing furnace is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Stick style annealing furnace and won the trust of customers.

2. Product configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Stick style annealing furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Stick style annealing furnace is reasonable for products with the same configuration.

3. company strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Stick style annealing furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Stick style annealing furnace will be different.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Stick style annealing furnace have more or less differences in price.

5. market supply and demand

If there is a large demand for Stick style annealing furnace in the market, the price of Stick style annealing furnace will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

Stick style annealing furnace

Stick style annealing furnaceIt can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，Simple structure and advanced technology.，it has the structure of ventilation system, furnace chamber, combustor, combustor and convection chamber。