What is a Stick style isothermal spheroidization annealing furnace? Introduction to the advantages and characteristics of the forging furnace

Stick style isothermal spheroidization annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Stick style isothermal spheroidization annealing furnace:

1、Brief introduction of Stick style isothermal spheroidization annealing furnace

Stick style isothermal spheroidization annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as heat treatment, Casting heating, Forging heating, normalizing and quench，is a kind of Stick style isothermal spheroidization annealing furnace manufactured by One-combustion energy saving。

Stick style isothermal spheroidization annealing furnace

2、Stick style isothermal spheroidization annealing furnace structure

The Stick style isothermal spheroidization annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Stick style isothermal spheroidization annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Stick style isothermal spheroidization annealing furnace

3、Functional advantages of Stick style isothermal spheroidization annealing furnace

Stick style isothermal spheroidization annealing furnaces have the following advantages.

1. Extend the service life of equipment

The Stick style isothermal spheroidization annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Improve product quality

Because the Stick style isothermal spheroidization annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Uniform heating

The Stick style isothermal spheroidization annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Efficient combustion

The Stick style isothermal spheroidization annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Efficient combustion

The Stick style isothermal spheroidization annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Stick style isothermal spheroidization annealing furnace

4、Stick style isothermal spheroidization annealing furnace application

Stick style isothermal spheroidization annealing furnaces have the following purposes.

1. Improve production efficiency

The Stick style isothermal spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Stick style isothermal spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Stick style isothermal spheroidization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Stick style isothermal spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Stick style isothermal spheroidization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Stick style isothermal spheroidization annealing furnace

5、Stick style isothermal spheroidization annealing furnace function

Stick style isothermal spheroidization annealing furnaceit has the functions of Forging heating, normalizing, heat treatment, temper and hardening and tempering。

Stick style isothermal spheroidization annealing furnace

6、Stick style isothermal spheroidization annealing furnace advantage

The advantages of Stick style isothermal spheroidization annealing furnace are as follows:

1. Extend the service life of equipment

The Stick style isothermal spheroidization annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Intelligent control

The Stick style isothermal spheroidization annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Improve product quality

Because the Stick style isothermal spheroidization annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Wide application range

The Stick style isothermal spheroidization annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. easy to operate

The operation interface of the Stick style isothermal spheroidization annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Stick style isothermal spheroidization annealing furnace

Stick style isothermal spheroidization annealing furnacethe main structure includes combustor, recovery of waste heat, Radiation chamber, convection chamber, ventilation system and so on，productThe structural design is simple, novel and special.，it has the characteristics of Strong adaptability, energy saving and environmental protection, energy-efficient, Strong adaptability and Easy to maintain，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。