Introduction to Stick type solid solution quenching furnace, heating furnace advantages, characteristics and principles

Stick type solid solution quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used in aerospace, war industry, electron, Machinery manufacturing and building materials，Widely used inImprove production efficiency,Metal tempering,Metal melting and casting,Metal tempering,Metal heat treatment and so on。

1、Brief introduction of Stick type solid solution quenching furnace

Stick type solid solution quenching furnaceIt is a forging heating device using gas as fuel.，is a kind of high quality and low price Stick type solid solution quenching furnace，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，Cheap and high quality。

Stick type solid solution quenching furnace

2、Stick type solid solution quenching furnace structure

The Stick type solid solution quenching furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Stick type solid solution quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Stick type solid solution quenching furnace

3、Stick type solid solution quenching furnace work site real shot

High-definition pictures of reliable Stick type solid solution quenching furnace at a glance。

Stick type solid solution quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Stick type solid solution quenching furnace characteristics

Stick type solid solution quenching furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The Stick type solid solution quenching furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stick type solid solution quenching furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Stick type solid solution quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Stick type solid solution quenching furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Stick type solid solution quenching furnace

5、Stick type solid solution quenching furnace use

The purpose of Stick type solid solution quenching furnace is introduced as follows:

1. Energy conservation and environmental protection

The Stick type solid solution quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Stick type solid solution quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Stick type solid solution quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Stick type solid solution quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick type solid solution quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Stick type solid solution quenching furnace

6、Stick type solid solution quenching furnace quotation

The Stick type solid solution quenching furnace price is introduced as follows:

1. mass discrepancy

The service life of products with excellent quality will be longer, and at the same time, such products are very high in science and technology, which will create higher benefits for customers and make the price generally high, which is the main reason for the high price.

2. Manufacturer's sales model

If there is no middleman to earn the difference, then the Stick type solid solution quenching furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Stick type solid solution quenching furnace have more or less differences in price.

4. Overall configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

5. Reasonable cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Stick type solid solution quenching furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

Stick type solid solution quenching furnace

Stick type solid solution quenching furnaceit mainly includes convection chamber, ventilation system, ventilation system, furnace chamber and Radiation chamber，This Stick type solid solution quenching furnaceSimple structure and reliable operation.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。