Introduction to Continuous roll heating furnace and Forging furnace structure principle

Continuous roll heating furnaceIt is a forging heating device using gas as fuel.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，features include Strong adaptability, Easy to control, Strong adaptability, Easy to maintain and Stable and reliable，it is widely used inaerospace,war industry,metallurgy,machinery,Machinery manufacturing and other industries，it has the structure of convection chamber, Radiation chamber, ventilation system, ventilation system and ventilation system，productSimple structure and reliable operation.。

1、Brief introduction of Continuous roll heating furnace

Continuous roll heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Continuous roll heating furnace

2、Introduction of Continuous roll heating furnace characteristics

Continuous roll heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Continuous roll heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to maintain

The structural design of the Continuous roll heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Continuous roll heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Continuous roll heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Continuous roll heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Continuous roll heating furnace

3、Physical picture of Continuous roll heating furnace

One-combustion energy saving Continuous roll heating furnacethe product looks atmospheric., the following is a panoramic shot of the Continuous roll heating furnace for your reference.。

Continuous roll heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Continuous roll heating furnace application

Continuous roll heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Continuous roll heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Continuous roll heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Continuous roll heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Continuous roll heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous roll heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Continuous roll heating furnace

5、How much is the Continuous roll heating furnace?

The Continuous roll heating furnace price is introduced as follows:

1. Configuration level

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Continuous roll heating furnace has a higher cost performance.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. Manufacturer scale

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. cost of production

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

Continuous roll heating furnace

6、Company service

One-combustion energy saving adheres to the service concept of "being honest, doing things according to rules, pioneering and innovating, mutual benefit and win-win", and serves every customer wholeheartedly to create quality products and intimate services for customers.。

One-combustion energy saving

Continuous roll heating furnacethe advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，is a common Continuous roll heating furnace。