Introduction to Energy saving roller furnace and forging furnace working principle

Energy saving roller furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It is a product series that integrates Energy conservation and environmental protection, Metal tempering, Metal forging heating, Metal melting and casting and Metal heat treatment，Strong adaptability,Stable and reliable,energy saving and environmental protection,Easy to control,Easy to maintain，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，is based on One-combustion energy saving is an advanced Energy saving roller furnace developed by our company in combination with the actual situation of the industry。The following is to introduce the Energy saving roller furnace:

1、Brief introduction of Energy saving roller furnace

Energy saving roller furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a kind of Energy saving roller furnace manufactured by One-combustion energy saving。

Energy saving roller furnace

2、Video analysis of Energy saving roller furnace

The following is the live video of Energy saving roller furnace designed and produced by One-combustion energy saving for users, from which we can see the Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. of Energy saving roller furnace.。

Energy saving roller furnace

As you can see from the live video.，One-combustion energy saving it can be used in metallurgy, Machinery manufacturing, petroleum, automobile, light industry and other industries。

3、Energy saving roller furnace picture

One-combustion energy saving Energy saving roller furnace came in many pictures, which made everyone feast their eyes.。

Energy saving roller furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Energy saving roller furnace characteristics

The Energy saving roller furnace features are as follows:

1. Efficient heating

The Energy saving roller furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Strong adaptability

The Energy saving roller furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Energy saving roller furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to maintain

The structural design of the Energy saving roller furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Energy saving roller furnace

5、How much is the Energy saving roller furnace?

The Energy saving roller furnace price is introduced as follows:

1. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. Model size

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

4. Product configuration difference

The difference in Energy saving roller furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Energy saving roller furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Energy saving roller furnace price can meet the purchasing needs of customers.

Energy saving roller furnace

6、Company discount

Energy saving roller furnace is a new type of forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for heat treatment and other industries. Now consult Energy saving roller furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Energy saving roller furnacemultifunctional, with functions such as Forging heating, hardening and tempering, Casting heating, temper and anneal，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the characteristics of energy-efficient, Strong adaptability, Easy to maintain, energy saving and environmental protection and Easy to control。