Introduction to Well type mold heating furnace and heating furnace working principle

Well type mold heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the main structure includes recovery of waste heat, combustor, furnace chamber, ventilation system, convection chamber and so on，This productThe structure is novel, special, advanced, reasonable and scientific.，support customization。The following is to introduce the Well type mold heating furnace:

1、Brief introduction of Well type mold heating furnace

Well type mold heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is developed and improved by One-combustion energy saving。

Well type mold heating furnace

2、Well type mold heating furnace performance advantage

The advantages of Well type mold heating furnace are as follows:

1. Intelligent control

The Well type mold heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Extend the service life of equipment

The Well type mold heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Multiple fuel options

Although the Well type mold heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Uniform heating

The Well type mold heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Well type mold heating furnace

3、Well type mold heating furnace use

The purpose of Well type mold heating furnace is introduced as follows:

1. Metal forging heating

The Well type mold heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type mold heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Well type mold heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type mold heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Well type mold heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Well type mold heating furnace

4、Introduction of Well type mold heating furnace characteristics

Well type mold heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Well type mold heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Well type mold heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The Well type mold heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Well type mold heating furnace

5、Well type mold heating furnace function

Well type mold heating furnaceit has the functions of hardening and tempering, normalizing, quench, Casting heating and heat treatment。

Well type mold heating furnace

Well type mold heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，features include Strong adaptability, Stable and reliable, energy-efficient, Easy to control and Strong adaptability，multifunctional, with functions such as hardening and tempering, temper, anneal, Forging heating and heat treatment。