Introduction to Bright deep well furnace, how much is the price of the forging furnace?

Bright deep well furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。The following is to introduce the Bright deep well furnace:

1、Brief introduction of Bright deep well furnace

Bright deep well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has been widely used in material, light industry, building materials, machinery, chemical industry and other industries，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has the functions of Energy conservation and environmental protection, Metal forging heating, Metal melting and casting, Metal tempering and Metal forging heating，is a common Bright deep well furnace。

Bright deep well furnace

2、Bright deep well furnace working site

Speak directly with facts on the spot。

Bright deep well furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as heat treatment, anneal, temper, quench and Casting heating。

3、Physical picture of Bright deep well furnace

Beautiful design, excellent material selection and excellent quality.。

Bright deep well furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Bright deep well furnace characteristics

Bright deep well furnace has the following characteristics

1. Strong adaptability

The Bright deep well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Bright deep well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Bright deep well furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Bright deep well furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

The combustion system and ventilation system of the Bright deep well furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Bright deep well furnace

5、Advantages of Bright deep well furnace principle

Bright deep well furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main features are Strong adaptability, Stable and reliable, Easy to control, Strong adaptability and energy saving and environmental protection，the product looks beautiful.，it has the functions of Forging heating, normalizing, heat treatment, hardening and tempering and anneal，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Bright deep well furnace

6、One-combustion energy saving service

On the premise of ensuring high quality and low price, One-combustion energy saving can also provide customers with high-standard services, help customers choose appropriate specifications and models, and install and debug products on site for them free of charge. If customers have special requirements, our company can also train product operators in operation knowledge. Besides, if everyone's products fail at any time, our company will rush to the scene to solve them in a short time and deal with them in time.。

One-combustion energy saving

Bright deep well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in Household necessities, material, war industry, petroleum and light industry，Easy to control,Easy to maintain,energy-efficient,Stable and reliable,energy saving and environmental protection。