What is a Bright multi well heating furnace? Introduction to the advantages and characteristics of heating furnace functions

Bright multi well heating furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，is a kind of high quality and low price Bright multi well heating furnace，It can be used for Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal heat treatment, Energy conservation and environmental protection, Metal tempering and so on，it is an ideal choice for customers to buy Bright multi well heating furnace。

1、Brief introduction of Bright multi well heating furnace

Bright multi well heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used inMachinery manufacturing,petroleum,automobile,chemical industry,metallurgy and other industries，has been favored by more and more customers.。

Bright multi well heating furnace

2、Structural advantages of Bright multi well heating furnace

The Bright multi well heating furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Radiation chamber

The heat load of the main place for Bright multi well heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Bright multi well heating furnace

3、Bright multi well heating furnace function

Bright multi well heating furnaceit has the functions of anneal, temper, Casting heating, Forging heating and quench，It has a wide range of uses, including Improve production efficiency, Metal melting and casting, Metal heat treatment, Improve production efficiency and Metal tempering，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，widely used in war industry, building materials, heat treatment, surface treatment, aerospace and other fields，it mainly includes recovery of waste heat, combustor, ventilation system, ventilation system and Radiation chamber，Bright multi well heating furnaceThe structure is novel, special, advanced, reasonable and scientific.。

Bright multi well heating furnace

4、Bright multi well heating furnace application

Bright multi well heating furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Bright multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Bright multi well heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal forging heating

The Bright multi well heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Bright multi well heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Bright multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Bright multi well heating furnace

5、Bright multi well heating furnace performance advantage

The advantages of Bright multi well heating furnace are as follows:

1. Extend the service life of equipment

The Bright multi well heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Bright multi well heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Bright multi well heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Improve product quality

Because the Bright multi well heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Uniform heating

The Bright multi well heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Bright multi well heating furnace

6、Bright multi well heating furnace customer scene picture

the product looks atmospheric., advanced technology, complete specifications and models。

Bright multi well heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Bright multi well heating furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。