What is a Low temperature absorption SCR flue gas denitrification system? How much is the price of the SCR denitration?

Low temperature absorption SCR flue gas denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，at the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，the product looks atmospheric.，multifunctional, with functions such as Promote sustainable development, environmental protection, Improve energy efficiency, Promote sustainable development and Improve energy efficiency，be loved by our customers.。The following is to introduce the Low temperature absorption SCR flue gas denitrification system:

1、Brief introduction of Low temperature absorption SCR flue gas denitrification system

Low temperature absorption SCR flue gas denitrification systemthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，customizable。

Low temperature absorption SCR flue gas denitrification system

2、Advantages of Low temperature absorption SCR flue gas denitrification system principle

Low temperature absorption SCR flue gas denitrification systemat work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，is a Low temperature absorption SCR flue gas denitrification system，it mainly includes Catalyst supply system, Temperature control and monitoring system, Flue gas mixing and distribution system, Catalyst reactor and control system，is an efficient, stable and environment-friendly flue gas denitrification technology.，the product looks beautiful.。

Low temperature absorption SCR flue gas denitrification system

3、Low temperature absorption SCR flue gas denitrification system introduction video

The following is the live video of Low temperature absorption SCR flue gas denitrification system designed and produced by One-combustion energy saving for users, from which we can see the the advantage is It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature absorption SCR flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature absorption SCR flue gas denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature absorption SCR flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature absorption SCR flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature absorption SCR flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature absorption SCR flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy. of Low temperature absorption SCR flue gas denitrification system.。

Low temperature absorption SCR flue gas denitrification system

As you can see from the live video.，One-combustion energy saving the full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.。

4、Structural advantages of Low temperature absorption SCR flue gas denitrification system

The Low temperature absorption SCR flue gas denitrification system has the following structure

1. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

2. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

3. control system

The whole Low temperature absorption SCR flue gas denitrification system is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

4. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

5. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

Low temperature absorption SCR flue gas denitrification system

5、Low temperature absorption SCR flue gas denitrification system function

Low temperature absorption SCR flue gas denitrification systemmultifunctional, with functions such as environmental protection, Improve working conditions, Promote sustainable development, Improve energy efficiency and environmental protection，it has the characteristics of Strong adaptability, Stable operation, Efficient denitration, Economically feasible and Stable operation，The structure is novel, special, advanced, reasonable and scientific.，Structure consists of Catalyst supply system, Temperature control and monitoring system, control system, Catalyst reactor, Flue gas mixing and distribution system and so on，is a common Low temperature absorption SCR flue gas denitrification system，the product looks atmospheric.。

Low temperature absorption SCR flue gas denitrification system

Low temperature absorption SCR flue gas denitrification systemthe product looks beautiful.，Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，Mainly used forImprove product quality,Meet the requirements of environmental protection,Flue gas denitrification,Promote sustainable development andImprove product quality。