Introduction to Strip heating furnace flue gas denitrification equipment, SCR flue gas denitrification specifications, model parameters

Strip heating furnace flue gas denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the product looks atmospheric.，the advantage is Technology has been developed and applied for many years, and it is mature and stable. The Strip heating furnace flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Strip heating furnace flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Strip heating furnace flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Strip heating furnace flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Strip heating furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Strip heating furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Strip heating furnace flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.。The following is to introduce the Strip heating furnace flue gas denitrification equipment:

1、Brief introduction of Strip heating furnace flue gas denitrification equipment

Strip heating furnace flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，multifunctional, with functions such as Improve energy efficiency, Improve energy efficiency, environmental protection, Promote sustainable development and Improve working conditions，Commonly used inImprove product quality,environmental protection,Meet the requirements of environmental protection,Improve product quality,Promote sustainable development and so on，it can be used in metallurgy, coal-fired power station, building materials, metallurgy, cement plant and other industries，is designed by One-combustion energy saving with advanced technology。

Strip heating furnace flue gas denitrification equipment

2、Strip heating furnace flue gas denitrification equipment structure

The Strip heating furnace flue gas denitrification equipment structure is introduced as follows:

1. Reactor

It is the core component of Strip heating furnace flue gas denitrification equipment technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

2. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

3. control system

The whole Strip heating furnace flue gas denitrification equipment is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

4. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

5. Reactor

It is the core component of Strip heating furnace flue gas denitrification equipment technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

Strip heating furnace flue gas denitrification equipment

3、Introduction of Strip heating furnace flue gas denitrification equipment characteristics

Strip heating furnace flue gas denitrification equipment has the following characteristics

1. Small secondary pollution

The by-products produced in the Strip heating furnace flue gas denitrification equipment opening process are nitrogen and water vapor, and there is no secondary pollution problem.

2. High denitration efficiency

The denitration efficiency of Strip heating furnace flue gas denitrification equipment technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

3. Environmental protection

The final products of Strip heating furnace flue gas denitrification equipment technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. Strong adaptability

Strip heating furnace flue gas denitrification equipment technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

Strip heating furnace flue gas denitrification equipment

4、Working principle of Strip heating furnace flue gas denitrification equipment

Strip heating furnace flue gas denitrification equipmentat runtime,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，It has a wide range of uses, including Flue gas denitrification, Improve product quality, environmental protection, Flue gas denitrification and Meet the requirements of environmental protection。

Strip heating furnace flue gas denitrification equipment

5、Strip heating furnace flue gas denitrification equipment structure composition

The Strip heating furnace flue gas denitrification equipment has the following structure

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

3. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

4. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

5. control system

The whole Strip heating furnace flue gas denitrification equipment is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

Strip heating furnace flue gas denitrification equipment

6、Strip heating furnace flue gas denitrification equipment video detail

You can buy Strip heating furnace flue gas denitrification equipment according to your needs and show you product videos.。

Strip heating furnace flue gas denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Strip heating furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Technology has been developed and applied for many years, and it is mature and stable. The Strip heating furnace flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Strip heating furnace flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Strip heating furnace flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Technology has been developed and applied for many years, and it is mature and stable. The Strip heating furnace flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Strip heating furnace flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Strip heating furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.。

Strip heating furnace flue gas denitrification equipmentmultifunctional, with functions such as environmental protection, Improve energy efficiency, Promote sustainable development, Improve working conditions and environmental protection，the product looks atmospheric.，usually used in coal-fired power station, iron and steel plant, Gas power plant, building materials, metallurgy and other fields。