Introduction to Industrial quenching furnace flue gas denitrification equipment, how much is the price of the SCR flue gas denitrification?

Industrial quenching furnace flue gas denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the main structure includes Catalyst supply system, Flue gas mixing and distribution system, control system, Temperature control and monitoring system and Catalyst reactor，is a kind of high quality and low price Industrial quenching furnace flue gas denitrification equipment，the advantage is The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Industrial quenching furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Industrial quenching furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Industrial quenching furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Industrial quenching furnace flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Industrial quenching furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Industrial quenching furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Industrial quenching furnace flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，has been favored by more and more customers.。The following is to introduce the Industrial quenching furnace flue gas denitrification equipment:

1、Brief introduction of Industrial quenching furnace flue gas denitrification equipment

Industrial quenching furnace flue gas denitrification equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，at the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，the main features are High denitration efficiency, Economically feasible, Strong adaptability, Less secondary pollution and Mature and stable technology，modern technology，The price is low and affordable。

Industrial quenching furnace flue gas denitrification equipment

2、Industrial quenching furnace flue gas denitrification equipment function

Industrial quenching furnace flue gas denitrification equipmentit has the functions of Promote sustainable development, environmental protection, Improve energy efficiency, Improve working conditions and Promote sustainable development，Cheap and high quality。

Industrial quenching furnace flue gas denitrification equipment

3、Industrial quenching furnace flue gas denitrification equipment application

Industrial quenching furnace flue gas denitrification equipmentIt has a wide range of uses, including Improve product quality, Flue gas denitrification, Improve product quality, Meet the requirements of environmental protection and environmental protection，is a popular Industrial quenching furnace flue gas denitrification equipment，The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Industrial quenching furnace flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Technology has been developed and applied for many years, and it is mature and stable. The Industrial quenching furnace flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Industrial quenching furnace flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Industrial quenching furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Industrial quenching furnace flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Industrial quenching furnace flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，is a kind of Industrial quenching furnace flue gas denitrification equipment manufactured by One-combustion energy saving。

Industrial quenching furnace flue gas denitrification equipment

4、Industrial quenching furnace flue gas denitrification equipment characteristics

The Industrial quenching furnace flue gas denitrification equipment features are as follows:

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. Strong adaptability

Industrial quenching furnace flue gas denitrification equipment technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

3. Stable operation and stability

The Industrial quenching furnace flue gas denitrification equipment technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. Strong adaptability

Industrial quenching furnace flue gas denitrification equipment technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

Industrial quenching furnace flue gas denitrification equipment

5、Industrial quenching furnace flue gas denitrification equipment quotation

The Industrial quenching furnace flue gas denitrification equipment price is introduced as follows:

1. company strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Industrial quenching furnace flue gas denitrification equipment is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Industrial quenching furnace flue gas denitrification equipment is much higher, so customers should choose products directly sold by manufacturers when purchasing.

2. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Industrial quenching furnace flue gas denitrification equipment has a higher cost performance.

3. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. Brand strength

Different brands of products in the same series have more or less differences in product prices, and different brands of Industrial quenching furnace flue gas denitrification equipment have more or less differences in price.

5. market supply and demand

When the market demand for Industrial quenching furnace flue gas denitrification equipment is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

Industrial quenching furnace flue gas denitrification equipment

6、One-combustion energy saving company service

Perfect after-sales service is One-combustion energy saving's business policy. Our company has a professional after-sales service team, and all customer service personnel and maintenance technicians need pre-job training before they can take up their posts. Before the sale, there are customer service personnel to cooperate with customers to do a good job in product selection, and at the same time provide detailed information such as Industrial quenching furnace flue gas denitrification equipment price and technical parameters; During the sale, sign a formal purchase contract with the customer and do a good job in product inspection to prevent leakage and delay the start-up time of the customer; After sale, we will provide customers with free transportation, installation and post-maintenance work. At the same time, we will pay regular return visits to the use of products. Once problems are found, we will send technicians to deal with them in time, and always keep the interests of customers doubled.。

One-combustion energy saving

Industrial quenching furnace flue gas denitrification equipmentin the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，the product looks beautiful.，is a kind of high quality and low price Industrial quenching furnace flue gas denitrification equipment。