Introduction to Automatic feeding forging furnace, Forging furnace specifications, model parameters

Automatic feeding forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，generally, it is composed of furnace chamber, convection chamber, furnace chamber, convection chamber, recovery of waste heat and other major components，is based on One-combustion energy saving is a kind of Automatic feeding forging furnace manufactured by One-combustion energy saving。

1、Brief introduction of Automatic feeding forging furnace

Automatic feeding forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks atmospheric.，It has a wide range of uses, and is often used inImprove production efficiency,Energy conservation and environmental protection,Metal melting and casting,Metal forging heating,Metal melting and casting and so on，be loved by our customers.。

Automatic feeding forging furnace

2、Automatic feeding forging furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Automatic feeding forging furnace production process and production site, and gain favorable comments and recognition from customers.。

Automatic feeding forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The overall structural design is relatively simple，it has the structure of Radiation chamber, ventilation system, combustor, ventilation system and recovery of waste heat。

3、Automatic feeding forging furnace advantage

The advantages of Automatic feeding forging furnace are as follows:

1. Improve product quality

Because the Automatic feeding forging furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Extend the service life of equipment

The Automatic feeding forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Rapid temperature rise

The Automatic feeding forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Efficient combustion

The Automatic feeding forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Automatic feeding forging furnace

4、Working principle of Automatic feeding forging furnace

Automatic feeding forging furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，it has been widely used in building materials, machinery, material, automobile, Household necessities and other industries，the product looks beautiful.。

Automatic feeding forging furnace

5、Structural advantages of Automatic feeding forging furnace

The Automatic feeding forging furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Automatic feeding forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Automatic feeding forging furnace

6、Automatic feeding forging furnace structure composition

The Automatic feeding forging furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Automatic feeding forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Automatic feeding forging furnace

Automatic feeding forging furnaceMainly used forMetal heat treatment,Improve production efficiency,Metal forging heating,Energy conservation and environmental protection andMetal tempering，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。