Introduction to Foundry denitration system, advantages, characteristics and principles of SCR denitration system

Foundry denitration systemis an efficient, stable and environment-friendly flue gas denitrification technology.，Efficient denitration,Strong adaptability,High denitration efficiency,Less secondary pollution,Good selectivity。The following is to introduce the Foundry denitration system:

1、Brief introduction of Foundry denitration system

Foundry denitration systemis an efficient, stable and environment-friendly flue gas denitrification technology.。

Foundry denitration system

2、Foundry denitration system introduction video

You can buy Foundry denitration system according to your needs and show you product videos.。

Foundry denitration system

As you can see from the live video.，One-combustion energy saving the product looks beautiful.。

3、Introduction of advantages of Foundry denitration system

The advantages of Foundry denitration system are as follows:

1. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Foundry denitration system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

2. Environmental friendliness

The by-products produced by Foundry denitration system technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Foundry denitration system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

3. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Foundry denitration system technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Foundry denitration system technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

4. Intelligent control and convenience of operation

The Foundry denitration system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Foundry denitration system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Foundry denitration system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

Foundry denitration system

4、Foundry denitration system structure

The Foundry denitration system structure is introduced as follows:

1. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. control system

The whole Foundry denitration system is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

4. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

5. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

Foundry denitration system

5、Foundry denitration system use

Foundry denitration systemWidely used inFlue gas denitrification,Improve product quality,Flue gas denitrification,Promote sustainable development,Improve product quality and so on。

Foundry denitration system

Foundry denitration systemis a common Foundry denitration system，delective catalytic reduction technology is an efficient flue gas denitrification technology.。