Introduction and advantages of Automatic feeding heating furnace

Automatic feeding heating furnaceIt is a forging heating device using gas as fuel.，is based on One-combustion energy saving is a Automatic feeding heating furnace newly developed by One-combustion energy saving。

1、Brief introduction of Automatic feeding heating furnace

Automatic feeding heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，structure mainly includes: convection chamber, ventilation system, recovery of waste heat, ventilation system, furnace chamber and so on，it is an ideal choice for customers to buy Automatic feeding heating furnace。

Automatic feeding heating furnace

2、Automatic feeding heating furnace advantage

The advantages of Automatic feeding heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic feeding heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Intelligent control

The Automatic feeding heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The Automatic feeding heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Wide application range

The Automatic feeding heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. easy to operate

The operation interface of the Automatic feeding heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Automatic feeding heating furnace

3、Automatic feeding heating furnace function

Automatic feeding heating furnacemultifunctional, with functions such as hardening and tempering, Forging heating, temper, normalizing and Casting heating，is a kind of high quality and low price Automatic feeding heating furnace，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Easy to control,Easy to control,energy-efficient,Easy to maintain,Stable and reliable，is a popular Automatic feeding heating furnace。

Automatic feeding heating furnace

4、Automatic feeding heating furnace use

The purpose of Automatic feeding heating furnace is introduced as follows:

1. Metal forging heating

The Automatic feeding heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Automatic feeding heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Automatic feeding heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Automatic feeding heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Automatic feeding heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Automatic feeding heating furnace

5、Structural advantages of Automatic feeding heating furnace

The Automatic feeding heating furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Automatic feeding heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Automatic feeding heating furnace

6、Structural characteristics of Automatic feeding heating furnace

The Automatic feeding heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. Radiation chamber

The heat load of the main place for Automatic feeding heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic feeding heating furnace

Automatic feeding heating furnacefeatures include energy-efficient, Strong adaptability, Easy to maintain, Stable and reliable and energy saving and environmental protection，multifunctional, with functions such as quench, anneal, heat treatment, hardening and tempering and heat treatment。