What is a Fully automatic feeding forging heating furnace? forging furnace specifications, models, and parameters

Fully automatic feeding forging heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

1、Brief introduction of Fully automatic feeding forging heating furnace

Fully automatic feeding forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It has a wide range of uses, including Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal forging heating and Improve production efficiency。

Fully automatic feeding forging heating furnace

2、Fully automatic feeding forging heating furnace application

Fully automatic feeding forging heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Fully automatic feeding forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Fully automatic feeding forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Fully automatic feeding forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Fully automatic feeding forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Fully automatic feeding forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Fully automatic feeding forging heating furnace

3、Structural advantages of Fully automatic feeding forging heating furnace

The Fully automatic feeding forging heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Fully automatic feeding forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Fully automatic feeding forging heating furnace

4、Advantages of Fully automatic feeding forging heating furnace principle

Fully automatic feeding forging heating furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is an ideal choice for customers to buy Fully automatic feeding forging heating furnace。

Fully automatic feeding forging heating furnace

5、Functional advantages of Fully automatic feeding forging heating furnace

Fully automatic feeding forging heating furnaces have the following advantages.

1. Wide application range

The Fully automatic feeding forging heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Fully automatic feeding forging heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Improve product quality

Because the Fully automatic feeding forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. easy to operate

The operation interface of the Fully automatic feeding forging heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Fully automatic feeding forging heating furnace

6、Fully automatic feeding forging heating furnace price

The Fully automatic feeding forging heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Brand strength

At present, there are various brands of Fully automatic feeding forging heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Fully automatic feeding forging heating furnace are different.

3. model

The quotation of the same series of Fully automatic feeding forging heating furnace with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

4. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

5. region

One-combustion energy saving located in Jinan., the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

Fully automatic feeding forging heating furnace

Fully automatic feeding forging heating furnacethe product looks atmospheric.，features include Easy to maintain, Stable and reliable, energy-efficient, energy saving and environmental protection and Strong adaptability。