Introduction to Heat resistant steel heating furnace, Forging furnace advantages, characteristics and principles

Heat resistant steel heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，it has the functions of normalizing, heat treatment, hardening and tempering, anneal and quench，is a Heat resistant steel heating furnace，it can be used in machinery, automobile, war industry, Household necessities, petroleum and other industries。The following is to introduce the Heat resistant steel heating furnace:

1、Brief introduction of Heat resistant steel heating furnace

Heat resistant steel heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，is carefully developed by One-combustion energy saving combined with advanced technology。

Heat resistant steel heating furnace

2、Heat resistant steel heating furnace use

The purpose of Heat resistant steel heating furnace is introduced as follows:

1. Metal forging heating

The Heat resistant steel heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat resistant steel heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Heat resistant steel heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Heat resistant steel heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Energy conservation and environmental protection

The Heat resistant steel heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Heat resistant steel heating furnace

3、Advantages of Heat resistant steel heating furnace principle

Heat resistant steel heating furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.，it is mainly composed of furnace chamber, Radiation chamber, combustor, recovery of waste heat and ventilation system，Heat resistant steel heating furnaceThe structure is novel, special, advanced, reasonable and scientific.。

Heat resistant steel heating furnace

4、Introduction of Heat resistant steel heating furnace characteristics

Heat resistant steel heating furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Heat resistant steel heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Efficient heating

The Heat resistant steel heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to control

The combustion system and ventilation system of the Heat resistant steel heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Heat resistant steel heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Heat resistant steel heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Heat resistant steel heating furnace

5、Heat resistant steel heating furnace display

Provide high-definition Heat resistant steel heating furnace real shot, a variety of specifications and models for customers to visit.。

Heat resistant steel heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Company service

With intimate service, hard quality and advanced technology, the Heat resistant steel heating furnace produced by One-combustion energy saving are not only guaranteed in quality but also affordable. One-combustion energy saving is always waiting for everyone's arrival.。

One-combustion energy saving

Heat resistant steel heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，energy-efficient,Stable and reliable,Easy to control,Stable and reliable,Strong adaptability，Widely used inMetal forging heating,Improve production efficiency,Metal heat treatment,Energy conservation and environmental protection,Metal melting and casting and so on。