Introduction to Through type heat treatment furnace, heating furnace advantages, characteristics and principles

Through type heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is widely used in metallurgy, electron, surface treatment, chemical industry, automobile and other industries。The following is to introduce the Through type heat treatment furnace:

1、Brief introduction of Through type heat treatment furnace

Through type heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，the product looks atmospheric.。

Through type heat treatment furnace

2、Through type heat treatment furnace structure composition

The Through type heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Through type heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Through type heat treatment furnace

3、Advantages of Through type heat treatment furnace principle

Through type heat treatment furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，be of high quality，low in price。

Through type heat treatment furnace

4、Through type heat treatment furnace advantage

The advantages of Through type heat treatment furnace are as follows:

1. Uniform heating

The Through type heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Through type heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Extend the service life of equipment

The Through type heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Improve product quality

Because the Through type heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Intelligent control

The Through type heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Through type heat treatment furnace

5、Through type heat treatment furnace HD real shot

Through type heat treatment furnace HD real shot, showing the product style.。

Through type heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Through type heat treatment furnaceis a popular Through type heat treatment furnace，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。