Introduction to Carburizing normalizing heating furnace, introduction to heating furnace function advantages and characteristics

Carburizing normalizing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Stable and reliable,energy-efficient,energy-efficient,Easy to control,Easy to maintain，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is an ideal choice for customers to buy Carburizing normalizing heating furnace。The following is to introduce the Carburizing normalizing heating furnace:

1、Brief introduction of Carburizing normalizing heating furnace

Carburizing normalizing heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，super quality and competitive price。

Carburizing normalizing heating furnace

2、Carburizing normalizing heating furnace principle

Carburizing normalizing heating furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a popular Carburizing normalizing heating furnace，it is widely used inautomobile,Household necessities,building materials,heat treatment,aerospace and other industries，generally, it is composed of ventilation system, furnace chamber, ventilation system, ventilation system, recovery of waste heat and other major components，This productThe overall structural design is relatively simple and compact.，has been favored by more and more customers.。

Carburizing normalizing heating furnace

3、Carburizing normalizing heating furnace function

Carburizing normalizing heating furnaceit has the functions of heat treatment, normalizing, Forging heating, Casting heating and quench，it is usually composed of combustor, convection chamber, Radiation chamber, furnace chamber and ventilation system，Carburizing normalizing heating furnaceSimple structure and advanced technology.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，the main features are energy saving and environmental protection, Stable and reliable, Strong adaptability, Strong adaptability and energy saving and environmental protection，is carefully developed by One-combustion energy saving combined with advanced technology。

Carburizing normalizing heating furnace

4、Carburizing normalizing heating furnace application

Carburizing normalizing heating furnaces have the following purposes.

1. Improve production efficiency

The Carburizing normalizing heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Carburizing normalizing heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Carburizing normalizing heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Carburizing normalizing heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Carburizing normalizing heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Carburizing normalizing heating furnace

5、How much is the Carburizing normalizing heating furnace?

The Carburizing normalizing heating furnace price is introduced as follows:

1. market factors

The amount of customers' demand for Carburizing normalizing heating furnace in the market also has a great influence on the price. When there are many customers purchasing this product in the market and the supply quantity of manufacturers is small, the Carburizing normalizing heating furnace price will be very high. On the contrary, when fewer customers purchase this product, there will be a phenomenon of oversupply, and the price of Carburizing normalizing heating furnace will naturally be reduced.

2. Manufacturer scale

One-combustion energy saving's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

3. Configuration level

The difference in Carburizing normalizing heating furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. sales mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Carburizing normalizing heating furnace have more or less differences in price.

Carburizing normalizing heating furnace

6、One-combustion energy saving company service

Service has a starting point, and satisfaction has no end. One-combustion energy saving provides services such as free design scheme before sale, free installation and debugging of products during sale, and regular return visits after sale to solve customer problems in time. If you have special requirements for products, manufacturers also support tailor-made.。

One-combustion energy saving

Carburizing normalizing heating furnaceIt is a forging heating device using gas as fuel.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，usually used in material, Machinery manufacturing, machinery, war industry, Machinery manufacturing and other fields。