Introduction to Bright annealing heat treatment furnace and heating furnace advantages and features

Bright annealing heat treatment furnaceIt is a forging heating device using gas as fuel.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as normalizing, hardening and tempering, quench, anneal and Forging heating，was developed and designed by One-combustion energy saving。The following is to introduce the Bright annealing heat treatment furnace:

1、Brief introduction of Bright annealing heat treatment furnace

Bright annealing heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The structure is novel, special, advanced, reasonable and scientific.，structure mainly includes: furnace chamber, ventilation system, Radiation chamber, recovery of waste heat, combustor and so on，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the product looks atmospheric.，it is an ideal choice for customers to buy Bright annealing heat treatment furnace。

Bright annealing heat treatment furnace

2、Bright annealing heat treatment furnace use

The purpose of Bright annealing heat treatment furnace is introduced as follows:

1. Metal forging heating

The Bright annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Bright annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Bright annealing heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright annealing heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Bright annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Bright annealing heat treatment furnace

3、Functional advantages of Bright annealing heat treatment furnace

Bright annealing heat treatment furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Extend the service life of equipment

The Bright annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Uniform heating

The Bright annealing heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Rapid temperature rise

The Bright annealing heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Efficient combustion

The Bright annealing heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Bright annealing heat treatment furnace

4、Bright annealing heat treatment furnace structure composition

The Bright annealing heat treatment furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. Radiation chamber

The heat load of the main place for Bright annealing heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Bright annealing heat treatment furnace

5、Introduction of Bright annealing heat treatment furnace characteristics

Bright annealing heat treatment furnace has the following characteristics

1. Stable and reliable

The Bright annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Bright annealing heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Bright annealing heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to maintain

The structural design of the Bright annealing heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Bright annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Bright annealing heat treatment furnace

6、One-combustion energy saving's strength

The company has many years of Bright annealing heat treatment furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Bright annealing heat treatment furnaceit is mainly composed of furnace chamber, convection chamber, ventilation system, recovery of waste heat and furnace chamber，This productThe overall structural design is simple, diverse and beautiful.，features include Easy to control, Strong adaptability, Stable and reliable, energy saving and environmental protection and energy-efficient，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。