What is a Isothermal annealing furnace? Introduction to the advantages and characteristics of forging furnace functions

Isothermal annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Commonly used inMetal heat treatment,Metal melting and casting,Metal tempering,Energy conservation and environmental protection,Metal tempering and so on，was developed and designed by One-combustion energy saving。

1、Brief introduction of Isothermal annealing furnace

Isothermal annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Isothermal annealing furnace

2、On-site real shot of Isothermal annealing furnace

A variety of series of Isothermal annealing furnace pictures are displayed, with exquisite design, reliable quality and trustworthiness.。

Isothermal annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural advantages of Isothermal annealing furnace

The Isothermal annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Isothermal annealing furnace

4、Introduction of Isothermal annealing furnace characteristics

Isothermal annealing furnace has the following characteristics

1. Easy to maintain

The structural design of the Isothermal annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Isothermal annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The Isothermal annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to maintain

The structural design of the Isothermal annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Isothermal annealing furnace

5、Introduction of Isothermal annealing furnace characteristics

Isothermal annealing furnace has the following characteristics

1. Efficient heating

The Isothermal annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to control

The combustion system and ventilation system of the Isothermal annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Isothermal annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Stable and reliable

The Isothermal annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Isothermal annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Isothermal annealing furnace

6、How much is the Isothermal annealing furnace?

The Isothermal annealing furnace price is introduced as follows:

1. Configuration difference

The difference in Isothermal annealing furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

2. sales mode

One-combustion energy saving Isothermal annealing furnace manufacturer is a direct selling manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Isothermal annealing furnace price is also low.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Isothermal annealing furnace have more or less differences in price.

4. market supply and demand

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. One-combustion energy saving has a deep understanding of this factor, so the price of our Isothermal annealing furnace is more reasonable.

5. quality

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

Isothermal annealing furnace

Isothermal annealing furnaceWidely used in Energy conservation and environmental protection, Metal forging heating, Improve production efficiency, Metal heat treatment and Metal melting and casting，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.。