Introduction to Split type annealing heating furnace, forging furnace advantages, characteristics and principles

Split type annealing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a popular Split type annealing heating furnace，multifunctional, with functions such as Forging heating, temper, quench, hardening and tempering and anneal，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，it has the characteristics of energy-efficient, Strong adaptability, energy saving and environmental protection, Stable and reliable and Stable and reliable。

1、Brief introduction of Split type annealing heating furnace

Split type annealing heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，be loved by our customers.。

Split type annealing heating furnace

2、Introduction of Split type annealing heating furnace characteristics

Split type annealing heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Split type annealing heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Split type annealing heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Split type annealing heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Split type annealing heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Split type annealing heating furnace

3、Split type annealing heating furnace HD real shot

Split type annealing heating furnace styles and designs are diverse, specifications and models can be customized according to customer needs, providing high-definition pictures for new and old customers' reference.。

Split type annealing heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Split type annealing heating furnace application

Split type annealing heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Split type annealing heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Split type annealing heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type annealing heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Split type annealing heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Split type annealing heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Split type annealing heating furnace

5、Split type annealing heating furnace advantage

The advantages of Split type annealing heating furnace are as follows:

1. easy to operate

The operation interface of the Split type annealing heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Split type annealing heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Split type annealing heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Wide application range

The Split type annealing heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Split type annealing heating furnace

6、Working principle of Split type annealing heating furnace

Split type annealing heating furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is widely used in machinery, war industry, aerospace, metallurgy and surface treatment，It can be used for Metal heat treatment, Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal tempering, Energy conservation and environmental protection and so on。

Split type annealing heating furnace

Split type annealing heating furnaceit is widely used in war industry, heat treatment, petroleum, material, electron and other industries，Mainly used forMetal heat treatment,Metal tempering,Metal melting and casting,Metal forging heating andMetal melting and casting。