Introduction to Tempering and tempering heating furnace and heating furnace advantages and features

Tempering and tempering heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，generally, it is composed of ventilation system, combustor, convection chamber, recovery of waste heat, Radiation chamber and other major components，energy saving and environmental protection,Strong adaptability,Stable and reliable,Easy to control,Easy to maintain。The following is to introduce the Tempering and tempering heating furnace:

1、Brief introduction of Tempering and tempering heating furnace

Tempering and tempering heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It has a wide range of uses, and is often used inMetal tempering,Metal heat treatment,Energy conservation and environmental protection,Metal melting and casting,Metal melting and casting and so on，it can be used in war industry, Machinery manufacturing, building materials, Household necessities, light industry and other industries。

Tempering and tempering heating furnace

2、Tempering and tempering heating furnace introduction video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Tempering and tempering heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Tempering and tempering heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is widely used inmachinery,heat treatment,aerospace,material,Household necessities and other industries。

3、Tempering and tempering heating furnace performance advantage

The advantages of Tempering and tempering heating furnace are as follows:

1. Uniform heating

The Tempering and tempering heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Multiple fuel options

Although the Tempering and tempering heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Tempering and tempering heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Improve product quality

Because the Tempering and tempering heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Tempering and tempering heating furnace

4、Tempering and tempering heating furnace customer scene picture

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Tempering and tempering heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Tempering and tempering heating furnace principle

Tempering and tempering heating furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it has the characteristics of energy-efficient, Strong adaptability, energy saving and environmental protection, Stable and reliable and Easy to control，Structure consists of recovery of waste heat, combustor, ventilation system, convection chamber, combustor and so on，This productThe structural design is simple, novel and special.，It is an efficient, energy-saving and environment-friendly metal heating device.。

Tempering and tempering heating furnace

6、How much is the Tempering and tempering heating furnace?

The Tempering and tempering heating furnace price is introduced as follows:

1. Manufacturer's strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Tempering and tempering heating furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Tempering and tempering heating furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

2. marketing channel

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Tempering and tempering heating furnace is low.

3. Quality advantages and disadvantages

Generally speaking, the higher the product quality, the higher the Tempering and tempering heating furnace price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. manufacturing cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Tempering and tempering heating furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

Tempering and tempering heating furnace

Tempering and tempering heating furnaceThe user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，structure mainly includes: ventilation system, furnace chamber, ventilation system, Radiation chamber, furnace chamber and so on。