What is a Low temperature tube heating furnace? Introduction to the advantages and characteristics of Forging furnace functions

Low temperature tube heating furnaceIt is a forging heating device using gas as fuel.，super quality and competitive price。

1、Brief introduction of Low temperature tube heating furnace

Low temperature tube heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used inmetallurgy,machinery,electron,petroleum,light industry and other industries，is a Low temperature tube heating furnace，is carefully developed by One-combustion energy saving combined with advanced technology。

Low temperature tube heating furnace

2、Structural characteristics of Low temperature tube heating furnace

The Low temperature tube heating furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Low temperature tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Low temperature tube heating furnace

3、Low temperature tube heating furnace use

The purpose of Low temperature tube heating furnace is introduced as follows:

1. Metal forging heating

The Low temperature tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Low temperature tube heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Low temperature tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Low temperature tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Low temperature tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Low temperature tube heating furnace

4、Low temperature tube heating furnace principle

Low temperature tube heating furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Low temperature tube heating furnace

5、Low temperature tube heating furnace characteristics

The Low temperature tube heating furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Low temperature tube heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to control

The combustion system and ventilation system of the Low temperature tube heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Low temperature tube heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to maintain

The structural design of the Low temperature tube heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Low temperature tube heating furnace

6、Low temperature tube heating furnace application

Low temperature tube heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Low temperature tube heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Low temperature tube heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Low temperature tube heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Low temperature tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Low temperature tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Low temperature tube heating furnace

Low temperature tube heating furnaceit has the functions of hardening and tempering, anneal, quench, normalizing and heat treatment，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。