What is a Regenerative tube roasting furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Regenerative tube roasting furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Easy to control,Strong adaptability,Easy to maintain,energy saving and environmental protection,Stable and reliable。

1、Brief introduction of Regenerative tube roasting furnace

Regenerative tube roasting furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main features are Strong adaptability, Easy to maintain, Easy to control, energy-efficient and energy saving and environmental protection，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，is carefully developed by One-combustion energy saving combined with advanced technology。

Regenerative tube roasting furnace

2、Introduction of advantages of Regenerative tube roasting furnace

The advantages of Regenerative tube roasting furnace are as follows:

1. Improve product quality

Because the Regenerative tube roasting furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Uniform heating

The Regenerative tube roasting furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative tube roasting furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Intelligent control

The Regenerative tube roasting furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Regenerative tube roasting furnace

3、Regenerative tube roasting furnace characteristics

The Regenerative tube roasting furnace features are as follows:

1. Efficient heating

The Regenerative tube roasting furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Efficient heating

The Regenerative tube roasting furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Strong adaptability

The Regenerative tube roasting furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Regenerative tube roasting furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Regenerative tube roasting furnace

4、Regenerative tube roasting furnace use

The purpose of Regenerative tube roasting furnace is introduced as follows:

1. Metal forging heating

The Regenerative tube roasting furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative tube roasting furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative tube roasting furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Regenerative tube roasting furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Regenerative tube roasting furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Regenerative tube roasting furnace

5、Regenerative tube roasting furnace display

Regenerative tube roasting furnace have various specifications and models, which can meet the diverse needs of users. The following are high-definition real pictures, which are exquisite in workmanship and trustworthy.。

Regenerative tube roasting furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Regenerative tube roasting furnaceCommonly used inEnergy conservation and environmental protection,Metal tempering,Metal heat treatment,Metal forging heating,Improve production efficiency and so on，It is a forging heating device using gas as fuel.。