Introduction to Gas storage tubular roaster, heating furnace advantages, characteristics and principles

Gas storage tubular roasterIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The overall structural design is simple, diverse and beautiful.，it is mainly composed of recovery of waste heat, combustor, convection chamber, ventilation system and ventilation system，It has the functions of Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Improve production efficiency and Metal melting and casting，the product looks beautiful.，is developed and improved by One-combustion energy saving。The following is to introduce the Gas storage tubular roaster:

1、Brief introduction of Gas storage tubular roaster

Gas storage tubular roasterIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the main features are Easy to maintain, Stable and reliable, Easy to control, energy-efficient and Easy to maintain，has been favored by more and more customers.。

Gas storage tubular roaster

2、Gas storage tubular roaster function

Gas storage tubular roastermultifunctional, with functions such as quench, Casting heating, temper, heat treatment and normalizing，It is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.。

Gas storage tubular roaster

3、Introduction of Gas storage tubular roaster characteristics

Gas storage tubular roaster has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Gas storage tubular roaster can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Gas storage tubular roaster can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Gas storage tubular roaster has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Gas storage tubular roasters are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Stable and reliable

The Gas storage tubular roaster has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Gas storage tubular roaster

4、Gas storage tubular roaster application

Gas storage tubular roasters have the following purposes.

1. Energy conservation and environmental protection

The Gas storage tubular roaster uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Gas storage tubular roaster has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Gas storage tubular roasters can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Gas storage tubular roaster can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Gas storage tubular roasters can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Gas storage tubular roaster

5、Gas storage tubular roaster performance advantage

Gas storage tubular roasters have the following advantages.

1. Extend the service life of equipment

The Gas storage tubular roaster adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Uniform heating

The Gas storage tubular roaster adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Efficient combustion

The Gas storage tubular roaster adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Wide application range

The Gas storage tubular roaster is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. easy to operate

The operation interface of the Gas storage tubular roaster is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Gas storage tubular roaster

6、Gas storage tubular roaster characteristics

The Gas storage tubular roaster features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Gas storage tubular roaster further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Gas storage tubular roaster is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Gas storage tubular roaster can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Gas storage tubular roaster can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Gas storage tubular roaster

Gas storage tubular roasterWidely used in Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal forging heating and Metal heat treatment，is a popular Gas storage tubular roaster，widely used in Machinery manufacturing, shipping, machinery, metallurgy, surface treatment and other fields。