Introduction to Double car continuous annealing furnace and forging furnace structure principle

Double car continuous annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，Simple structure and reliable operation.，it is mainly composed of ventilation system, ventilation system, combustor, ventilation system and recovery of waste heat。The following is to introduce the Double car continuous annealing furnace:

1、Brief introduction of Double car continuous annealing furnace

Double car continuous annealing furnaceIt is a forging heating device using gas as fuel.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the characteristics of Strong adaptability, Easy to control, Strong adaptability, Easy to maintain and energy saving and environmental protection，be loved by our customers.。

Double car continuous annealing furnace

2、Double car continuous annealing furnace use

The purpose of Double car continuous annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Double car continuous annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Double car continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Double car continuous annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Double car continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Double car continuous annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Double car continuous annealing furnace

3、Double car continuous annealing furnace performance advantage

The advantages of Double car continuous annealing furnace are as follows:

1. Intelligent control

The Double car continuous annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Extend the service life of equipment

The Double car continuous annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Multiple fuel options

Although the Double car continuous annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Improve product quality

Because the Double car continuous annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Double car continuous annealing furnace

4、Double car continuous annealing furnace display

Overview of high-definition pictures,the product looks beautiful., different specifications and models。

Double car continuous annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Double car continuous annealing furnace principle

Double car continuous annealing furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used inpetroleum,metallurgy,electron,war industry,heat treatment and other industries，it has the functions of Casting heating, quench, hardening and tempering, Forging heating and normalizing，be of high quality。

Double car continuous annealing furnace

6、Double car continuous annealing furnace price

The Double car continuous annealing furnace price is introduced as follows:

1. geographical position

The price of Double car continuous annealing furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a self-produced and self-selling manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Double car continuous annealing furnace price positioning more reasonable, low-cost and economical.

2. manufacturing cost

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

3. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Double car continuous annealing furnace price and service can meet the actual needs of customers.

4. Brand strength

At present, there are various brands of Double car continuous annealing furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Double car continuous annealing furnace are different.

5. cost of production

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

Double car continuous annealing furnace

Double car continuous annealing furnacestructure mainly includes: Radiation chamber, convection chamber, furnace chamber, combustor, Radiation chamber and so on，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main features are Easy to control, Stable and reliable, energy-efficient, Strong adaptability and Easy to control。