Yiran178-6053-1222

Introduction to Double door trolley heating furnace and Forging furnace structure principle

2025-5-27

Double door trolley heating furnaceIt is a forging heating device using gas as fuel.,Mainly used forEnergy conservation and environmental protection,Metal melting and casting,Improve production efficiency,Metal forging heating andMetal tempering,usually used in electron, metallurgy, light industry, petroleum, material and other fields,is a Double door trolley heating furnace,is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Double door trolley heating furnace

Double door trolley heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.,at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.,it is widely used inHousehold necessities,war industry,metallurgy,Household necessities,electron and other industries。

Double door trolley heating furnace

Double door trolley heating furnace

2、Double door trolley heating furnace application

Double door trolley heating furnaces have the following purposes.

  1. Improve production efficiency
  2. The Double door trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

  3. Metal heat treatment
  4. In addition to forging heating, Double door trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

  5. Metal tempering
  6. By properly heating and cooling the metal material, the Double door trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

  7. Metal forging heating
  8. The Double door trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

  9. Metal heat treatment
  10. In addition to forging heating, Double door trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Double door trolley heating furnace

Double door trolley heating furnace

3、Functional advantages of Double door trolley heating furnace

Double door trolley heating furnaces have the following advantages.

  1. Improve product quality
  2. Because the Double door trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

  3. Multiple fuel options
  4. Although the Double door trolley heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

  5. Intelligent control
  6. The Double door trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

  7. Rapid temperature rise
  8. The Double door trolley heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

  9. Uniform heating
  10. The Double door trolley heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Double door trolley heating furnace

Double door trolley heating furnace

4、Double door trolley heating furnace video detail

The following is the live video of Double door trolley heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved. of One-combustion energy savingDouble door trolley heating furnace.。

Double door trolley heating furnace

As you can see from the live video.,Shandong yiran energy-saving environment protection co., ltd It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

5、Structural characteristics of Double door trolley heating furnace

The Double door trolley heating furnace structure is introduced as follows:

  1. ventilation system
  2. Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

  3. Radiation chamber
  4. The heat load of the main place for Double door trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

  5. furnace chamber
  6. A space for holding metallic materials for heating.

  7. Waste heat recovery system
  8. Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

  9. combustor
  10. The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Double door trolley heating furnace

Double door trolley heating furnace

6、Double door trolley heating furnace function

Double door trolley heating furnaceit has the functions of normalizing, heat treatment, quench, hardening and tempering and Forging heating,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.,Widely used in Metal forging heating, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment and Metal tempering,it is mainly composed of combustor, ventilation system, ventilation system, recovery of waste heat and ventilation system,can be customized according to user's needs.。

Double door trolley heating furnace

Double door trolley heating furnace

Double door trolley heating furnaceThe structure is novel, special, advanced, reasonable and scientific.,it mainly includes ventilation system, Radiation chamber, furnace chamber, recovery of waste heat and convection chamber,It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。