Introduction to Stepping bottom heating furnace, how much is the price of the forging furnace?

Stepping bottom heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as normalizing, anneal, Forging heating, hardening and tempering and quench，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。The following is to introduce the Stepping bottom heating furnace:

1、Brief introduction of Stepping bottom heating furnace

Stepping bottom heating furnaceIt is a forging heating device using gas as fuel.，it is usually composed of combustor, ventilation system, ventilation system, Radiation chamber and convection chamber。

Stepping bottom heating furnace

2、Advantages of Stepping bottom heating furnace principle

Stepping bottom heating furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，support customization。

Stepping bottom heating furnace

3、Stepping bottom heating furnace structure composition

The Stepping bottom heating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Stepping bottom heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Stepping bottom heating furnace

4、Stepping bottom heating furnace characteristics

The Stepping bottom heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Stepping bottom heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Stepping bottom heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Stepping bottom heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Strong adaptability

The Stepping bottom heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Stepping bottom heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Stepping bottom heating furnace

5、Stepping bottom heating furnace function

Stepping bottom heating furnaceit has the functions of heat treatment, Casting heating, normalizing, hardening and tempering and Casting heating，It is a forging heating device using gas as fuel.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，is a kind of high quality and low price Stepping bottom heating furnace，is developed and improved by One-combustion energy saving。

Stepping bottom heating furnace

6、One-combustion energy saving workshop real shot

You can buy Stepping bottom heating furnace according to your needs and show you product videos.。

Stepping bottom heating furnace

As you can see from the live video.One-combustion energy saving the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Stepping bottom heating furnacethe product looks atmospheric.，Commonly used inEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal heat treatment,Metal forging heating and so on，it has the structure of recovery of waste heat, combustor, furnace chamber, ventilation system and combustor，This Stepping bottom heating furnaceThe overall structural design is simple and novel.。