What is a Energy saving and environmentally friendly step-by-step heat treatment furnace? heating furnace specifications, models, and parameters

Energy saving and environmentally friendly step-by-step heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it can be used in Machinery manufacturing, petroleum, chemical industry, building materials, light industry and other industries。The following is to introduce the Energy saving and environmentally friendly step-by-step heat treatment furnace:

1、Brief introduction of Energy saving and environmentally friendly step-by-step heat treatment furnace

Energy saving and environmentally friendly step-by-step heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it is widely used in pharmacy, machinery, war industry, heat treatment, material and other industries。

Energy saving and environmentally friendly step-by-step heat treatment furnace

2、Introduction of Energy saving and environmentally friendly step-by-step heat treatment furnace characteristics

Energy saving and environmentally friendly step-by-step heat treatment furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Energy saving and environmentally friendly step-by-step heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Stable and reliable

The Energy saving and environmentally friendly step-by-step heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The Energy saving and environmentally friendly step-by-step heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to maintain

The structural design of the Energy saving and environmentally friendly step-by-step heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the Energy saving and environmentally friendly step-by-step heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Energy saving and environmentally friendly step-by-step heat treatment furnace

3、Energy saving and environmentally friendly step-by-step heat treatment furnace structure

The Energy saving and environmentally friendly step-by-step heat treatment furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly step-by-step heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Energy saving and environmentally friendly step-by-step heat treatment furnace

4、Energy saving and environmentally friendly step-by-step heat treatment furnace display

Energy saving and environmentally friendly step-by-step heat treatment furnace HD factory map, all-round shooting, for our customers to visit.。

Energy saving and environmentally friendly step-by-step heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Energy saving and environmentally friendly step-by-step heat treatment furnace application

Energy saving and environmentally friendly step-by-step heat treatment furnaces have the following purposes.

1. Energy conservation and environmental protection

The Energy saving and environmentally friendly step-by-step heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Energy saving and environmentally friendly step-by-step heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Energy saving and environmentally friendly step-by-step heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, Energy saving and environmentally friendly step-by-step heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Energy saving and environmentally friendly step-by-step heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Energy saving and environmentally friendly step-by-step heat treatment furnace

6、Energy saving and environmentally friendly step-by-step heat treatment furnace quotation

The Energy saving and environmentally friendly step-by-step heat treatment furnace price is introduced as follows:

1. regional advantages

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

2. sales mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. model

Because there are many specifications and models of Energy saving and environmentally friendly step-by-step heat treatment furnace, the quotations of Energy saving and environmentally friendly step-by-step heat treatment furnace with different specifications and models are different.

5. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Energy saving and environmentally friendly step-by-step heat treatment furnace

Energy saving and environmentally friendly step-by-step heat treatment furnaceit has the characteristics of Strong adaptability, energy saving and environmental protection, Stable and reliable, energy-efficient and energy saving and environmental protection，usually used in chemical industry, electron, light industry, petroleum, Machinery manufacturing and other fields，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。