What is a Plate chain heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Plate chain heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，was developed and designed by One-combustion energy saving。

1、Brief introduction of Plate chain heating furnace

Plate chain heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Plate chain heating furnace

2、Introduction of advantages of Plate chain heating furnace

The advantages of Plate chain heating furnace are as follows:

1. easy to operate

The operation interface of the Plate chain heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Wide application range

The Plate chain heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Improve product quality

Because the Plate chain heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Intelligent control

The Plate chain heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Plate chain heating furnace

3、Structural advantages of Plate chain heating furnace

The Plate chain heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Plate chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Plate chain heating furnace

4、Plate chain heating furnace video

You can buy Plate chain heating furnace according to your needs and show you Plate chain heating furnace videos.。

Plate chain heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as hardening and tempering, quench, heat treatment, Forging heating and normalizing。

5、Plate chain heating furnace use

The purpose of Plate chain heating furnace is introduced as follows:

1. Metal forging heating

The Plate chain heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Plate chain heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Plate chain heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Plate chain heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Plate chain heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Plate chain heating furnace

Plate chain heating furnaceit has the characteristics of energy saving and environmental protection, energy-efficient, Strong adaptability, Easy to maintain and Easy to control，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。