What is a Environmentally friendly roller furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Environmentally friendly roller furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，widely used in material, shipping, Household necessities, heat treatment, electron and other fields，is a kind of high quality and low price Environmentally friendly roller furnace，the main features are energy saving and environmental protection, Stable and reliable, energy-efficient, energy saving and environmental protection and Easy to control。The following is to introduce the Environmentally friendly roller furnace:

1、Brief introduction of Environmentally friendly roller furnace

Environmentally friendly roller furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Environmentally friendly roller furnace

2、Environmentally friendly roller furnace use

The purpose of Environmentally friendly roller furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly roller furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal tempering

By properly heating and cooling the metal material, the Environmentally friendly roller furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Environmentally friendly roller furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Environmentally friendly roller furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Environmentally friendly roller furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Environmentally friendly roller furnace

3、Environmentally friendly roller furnace structure

The Environmentally friendly roller furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Environmentally friendly roller furnace

4、Environmentally friendly roller furnace work site real shot

Beautiful design, excellent material selection and excellent quality.。

Environmentally friendly roller furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Environmentally friendly roller furnace introduction video

On-site aerial photography of Environmentally friendly roller furnace。

Environmentally friendly roller furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a Environmentally friendly roller furnace。

Environmentally friendly roller furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.，the main structure includes furnace chamber, ventilation system, combustor, Radiation chamber and convection chamber。