What is a Industrial deep well furnace? Introduction to the principle of forging furnace structure

Industrial deep well furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Industrial deep well furnace

Industrial deep well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，It is a product series that integrates Energy conservation and environmental protection, Metal heat treatment, Metal forging heating, Improve production efficiency and Energy conservation and environmental protection，multifunctional, with functions such as Forging heating, Casting heating, heat treatment, quench and temper，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Industrial deep well furnace

2、Industrial deep well furnace function

Industrial deep well furnaceit has the functions of anneal, normalizing, heat treatment, Forging heating and Casting heating，widely used in material, chemical industry, shipping, aerospace, electron and other fields，The overall structural design is relatively simple and compact.，the main structure includes convection chamber, combustor, ventilation system, combustor and ventilation system，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，modern technology。

Industrial deep well furnace

3、Industrial deep well furnace application

Industrial deep well furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Industrial deep well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Industrial deep well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Industrial deep well furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Industrial deep well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Industrial deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Industrial deep well furnace

4、Industrial deep well furnace working site

Speak directly with facts on the spot。

Industrial deep well furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks beautiful.。

5、Introduction of Industrial deep well furnace characteristics

Industrial deep well furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Industrial deep well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Industrial deep well furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Industrial deep well furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Industrial deep well furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Industrial deep well furnace

6、Industrial deep well furnace price

The Industrial deep well furnace price is introduced as follows:

1. Model type

There are several specifications and models of Industrial deep well furnace, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Industrial deep well furnace, and the budget and other requirements recommend suitable Industrial deep well furnace for everyone.

2. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Industrial deep well furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Industrial deep well furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. manufacturing cost

Cost is a direct and fundamental factor that affects the price of Industrial deep well furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Industrial deep well furnace price, low in cost and low in price.

4. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. quality factor

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

Industrial deep well furnace

Industrial deep well furnacewidely used inmachinery,Machinery manufacturing,light industry,automobile,building materials and other industries，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。