What is a Environmentally friendly heat treatment heating furnace? Introduction to the principle of forging furnace structure

Environmentally friendly heat treatment heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of high quality and low price Environmentally friendly heat treatment heating furnace，the main structure includes convection chamber, combustor, ventilation system, furnace chamber, Radiation chamber and so on。The following is to introduce the Environmentally friendly heat treatment heating furnace:

1、Brief introduction of Environmentally friendly heat treatment heating furnace

Environmentally friendly heat treatment heating furnaceIt is a forging heating device using gas as fuel.。

Environmentally friendly heat treatment heating furnace

2、Environmentally friendly heat treatment heating furnace use

The purpose of Environmentally friendly heat treatment heating furnace is introduced as follows:

1. Metal forging heating

The Environmentally friendly heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal forging heating

The Environmentally friendly heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Environmentally friendly heat treatment heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Environmentally friendly heat treatment heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Environmentally friendly heat treatment heating furnace

3、Introduction of advantages of Environmentally friendly heat treatment heating furnace

The advantages of Environmentally friendly heat treatment heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Wide application range

The Environmentally friendly heat treatment heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Rapid temperature rise

The Environmentally friendly heat treatment heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Multiple fuel options

Although the Environmentally friendly heat treatment heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Environmentally friendly heat treatment heating furnace

4、Environmentally friendly heat treatment heating furnace characteristics

The Environmentally friendly heat treatment heating furnace features are as follows:

1. Efficient heating

The Environmentally friendly heat treatment heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Environmentally friendly heat treatment heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Environmentally friendly heat treatment heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Stable and reliable

The Environmentally friendly heat treatment heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Environmentally friendly heat treatment heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Environmentally friendly heat treatment heating furnace

5、Environmentally friendly heat treatment heating furnace structure

The Environmentally friendly heat treatment heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Radiation chamber

The heat load of the main place for Environmentally friendly heat treatment heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Environmentally friendly heat treatment heating furnace

6、One-combustion energy saving introduced

One-combustion energy saving has many years of experience in Environmentally friendly heat treatment heating furnace production, and is a professional Environmentally friendly heat treatment heating furnace manufacturer. With favorable Environmentally friendly heat treatment heating furnace price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Environmentally friendly heat treatment heating furnace manufacturer in Jinan.。

One-combustion energy saving

Environmentally friendly heat treatment heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Environmentally friendly heat treatment heating furnace。