Introduction to Rapid heating heat treatment furnace, advantages, characteristics and principles of heating furnace

Rapid heating heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。The following is to introduce the Rapid heating heat treatment furnace:

1、Brief introduction of Rapid heating heat treatment furnace

Rapid heating heat treatment furnaceIt is a forging heating device using gas as fuel.，Strong adaptability,Stable and reliable,Strong adaptability,Easy to control,energy saving and environmental protection，the product looks beautiful.，it has the structure of ventilation system, combustor, convection chamber, recovery of waste heat and Radiation chamber，Cheap and high quality。

Rapid heating heat treatment furnace

2、Introduction of Rapid heating heat treatment furnace characteristics

Rapid heating heat treatment furnace has the following characteristics

1. Efficient heating

The Rapid heating heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The Rapid heating heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The Rapid heating heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Rapid heating heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Rapid heating heat treatment furnace

3、Structural characteristics of Rapid heating heat treatment furnace

The Rapid heating heat treatment furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Rapid heating heat treatment furnace

4、Rapid heating heat treatment furnace function

Rapid heating heat treatment furnacemultifunctional, with functions such as Casting heating, heat treatment, temper, hardening and tempering and normalizing，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is an efficient, energy-saving and environment-friendly metal heating device.，it is an ideal choice for customers to buy Rapid heating heat treatment furnace。

Rapid heating heat treatment furnace

5、Rapid heating heat treatment furnace principle

Rapid heating heat treatment furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the product looks atmospheric.。

Rapid heating heat treatment furnace

6、company strength

The company has many years of Rapid heating heat treatment furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Rapid heating heat treatment furnacegenerally, it is composed of ventilation system, furnace chamber, ventilation system, Radiation chamber, furnace chamber and other major components，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Widely used in Metal melting and casting, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection and Metal heat treatment。