Introduction to Through type high-temperature quenching industrial furnace, introduction to forging furnace function advantages and characteristics

Through type high-temperature quenching industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，is based on One-combustion energy saving is a Through type high-temperature quenching industrial furnace newly developed by One-combustion energy saving。

1、Brief introduction of Through type high-temperature quenching industrial furnace

Through type high-temperature quenching industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular Through type high-temperature quenching industrial furnace，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，Mainly used forMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating andMetal tempering，be loved by our customers.。

Through type high-temperature quenching industrial furnace

2、Through type high-temperature quenching industrial furnace characteristics

The Through type high-temperature quenching industrial furnace features are as follows:

1. Efficient heating

The Through type high-temperature quenching industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Stable and reliable

The Through type high-temperature quenching industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Through type high-temperature quenching industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Through type high-temperature quenching industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Through type high-temperature quenching industrial furnace

3、Through type high-temperature quenching industrial furnace real shot picture

Through type high-temperature quenching industrial furnace specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

Through type high-temperature quenching industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural advantages of Through type high-temperature quenching industrial furnace

The Through type high-temperature quenching industrial furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Through type high-temperature quenching industrial furnace

5、Through type high-temperature quenching industrial furnace function

Through type high-temperature quenching industrial furnaceit has the functions of Casting heating, hardening and tempering, anneal, heat treatment and normalizing，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，Cheap and high quality。

Through type high-temperature quenching industrial furnace

6、Through type high-temperature quenching industrial furnace quotation

The Through type high-temperature quenching industrial furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Through type high-temperature quenching industrial furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Through type high-temperature quenching industrial furnace are different.

2. regional difference

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Through type high-temperature quenching industrial furnace.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Low cost of raw materials

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Through type high-temperature quenching industrial furnace.

5. Configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

Through type high-temperature quenching industrial furnace

Through type high-temperature quenching industrial furnaceCommonly used inMetal heat treatment,Metal melting and casting,Metal heat treatment,Improve production efficiency,Metal tempering and so on，features include energy-efficient, Easy to control, Easy to maintain, energy saving and environmental protection and Stable and reliable。