Introduction to Roller type annealing furnace and heating furnace working principle

Roller type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，structure mainly includes: recovery of waste heat, ventilation system, Radiation chamber, convection chamber, ventilation system and so on，it is an ideal choice for customers to buy Roller type annealing furnace。

1、Brief introduction of Roller type annealing furnace

Roller type annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it can be used in aerospace, automobile, petroleum, chemical industry, shipping and other industries，Easy to maintain,Easy to control,energy-efficient,energy saving and environmental protection,Strong adaptability。

Roller type annealing furnace

2、Roller type annealing furnace application

Roller type annealing furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Roller type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Roller type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Roller type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Roller type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Roller type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Roller type annealing furnace

3、Introduction of Roller type annealing furnace characteristics

Roller type annealing furnace has the following characteristics

1. Strong adaptability

The Roller type annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Roller type annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to maintain

The structural design of the Roller type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

The combustion system and ventilation system of the Roller type annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Roller type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Roller type annealing furnace

4、Advantages of Roller type annealing furnace principle

Roller type annealing furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，support customization。

Roller type annealing furnace

5、Roller type annealing furnace application

Roller type annealing furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Roller type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Roller type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Roller type annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Roller type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Roller type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Roller type annealing furnace

6、How much is the Roller type annealing furnace?

The Roller type annealing furnace price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

2. Quality advantages and disadvantages

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

3. geographical position

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving address:Jinan, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Roller type annealing furnace have more or less differences in price.

5. Low cost of raw materials

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

Roller type annealing furnace

Roller type annealing furnaceIt has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal heat treatment,Metal forging heating,Metal melting and casting,Metal tempering and so on，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。