What is a Heat treatment deep well furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Heat treatment deep well furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，customizable。

1、Brief introduction of Heat treatment deep well furnace

Heat treatment deep well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It has a wide range of uses, and is often used inMetal forging heating,Metal tempering,Metal heat treatment,Metal melting and casting,Energy conservation and environmental protection and so on，multifunctional, with functions such as temper, anneal, quench, Casting heating and Forging heating，the product looks atmospheric.，Simple structure and advanced technology.，it is usually composed of furnace chamber, combustor, ventilation system, furnace chamber and convection chamber。

Heat treatment deep well furnace

2、Heat treatment deep well furnace video live broadcast

On-site aerial photography of Heat treatment deep well furnace。

Heat treatment deep well furnace

As you can see from the live video.，One-combustion energy saving It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

3、Structural advantages of Heat treatment deep well furnace

The Heat treatment deep well furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Radiation chamber

The heat load of the main place for Heat treatment deep well furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Heat treatment deep well furnace

4、Introduction of advantages of Heat treatment deep well furnace

Heat treatment deep well furnaces have the following advantages.

1. Rapid temperature rise

The Heat treatment deep well furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Heat treatment deep well furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Multiple fuel options

Although the Heat treatment deep well furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Heat treatment deep well furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Extend the service life of equipment

The Heat treatment deep well furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Heat treatment deep well furnace

5、Heat treatment deep well furnace application

Heat treatment deep well furnaces have the following purposes.

1. Improve production efficiency

The Heat treatment deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Heat treatment deep well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Heat treatment deep well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Heat treatment deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Heat treatment deep well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Heat treatment deep well furnace

6、Heat treatment deep well furnace characteristics

The Heat treatment deep well furnace features are as follows:

1. Strong adaptability

The Heat treatment deep well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Heat treatment deep well furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Efficient heating

The Heat treatment deep well furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Stable and reliable

The Heat treatment deep well furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Heat treatment deep well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Heat treatment deep well furnace

Heat treatment deep well furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as hardening and tempering, normalizing, temper, Forging heating and heat treatment，usually used in metallurgy, petroleum, shipping, war industry, pharmacy and other fields。