Introduction to Fully automatic industrial heating furnace and heating furnace structure principle

Fully automatic industrial heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Strong adaptability,Strong adaptability,Stable and reliable,Easy to control,Easy to maintain，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Fully automatic industrial heating furnace:

1、Brief introduction of Fully automatic industrial heating furnace

Fully automatic industrial heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Fully automatic industrial heating furnace

2、Fully automatic industrial heating furnace real shot picture

A high-definition picture list of Fully automatic industrial heating furnace is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Jinan, Shandong province, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Fully automatic industrial heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural characteristics of Fully automatic industrial heating furnace

The Fully automatic industrial heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Fully automatic industrial heating furnace

4、Structural advantages of Fully automatic industrial heating furnace

The Fully automatic industrial heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Fully automatic industrial heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Fully automatic industrial heating furnace

5、Fully automatic industrial heating furnace field real shot

The following is the live video of Fully automatic industrial heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. of One-combustion energy savingproduce的Fully automatic industrial heating furnace.。

Fully automatic industrial heating furnace

As you can see from the live video.，One-combustion energy saving at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

6、Video analysis of Fully automatic industrial heating furnace

The following is the live video of Fully automatic industrial heating furnace designed and produced by One-combustion energy saving for users, from which we can see the Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency. of One-combustion energy savingFully automatic industrial heating furnace.。

Fully automatic industrial heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

Fully automatic industrial heating furnaceIt has a wide range of uses, and is often used inImprove production efficiency,Metal tempering,Metal heat treatment,Energy conservation and environmental protection,Improve production efficiency and so on，It is a forging heating device using gas as fuel.，is a Fully automatic industrial heating furnace。